(Rated for under 100000 cycles) Mold design recommended. Mold base can be of mild steel or aluminum. Cores and cavities can be of aluminum mild steel or any other agreed upon metal. All other extras optional.
Rated for under 500000 cycles Mold design recommended Mold base should be a minimum hardness of 165 BHN. Cores and cavities must be 280 BHN or higher. All other extras optional.
Rated for no more than one million cycles。 Molds design required. This mold is identical to the type 101 with the following items not required: 1.guided ejection hardened slide wear plates plated water channels and wear plated cavities. 2.All other extras are optional. This tool is a medium to high production tool that is good for abrasive materials and / or close tolerance products.
(Rated for one million or more cycles) Mold design required. Mold base should be a minimum hardness of 280 BHN.Molding surfaces (cavities and cores) must be hardened to a minimum of 48 RC All other details such as slides heel blocks gibs wedge blocks etc. should also be of hardened tool steels. [...]